Water heater repair near me is a troubling issue to deal with. Things can turn suddenly and require immediate attention. Burst valves,
heat element problems, or any other number of issues could pop up at any time.
Like any piece of constant-use machinery, your hot water heater has a lifespan. When getting on in years, you will see a definite change in efficacy and efficiency. This can potentially be when you notice faulty parts or performance issues, and lead to needing to call water heater repair (near me).
Luckily, there are some great maintenance tips to stay ahead of the game and to ensure that your heater has the most longevity and efficiency as possible. Some of these may be a one time fix, others may require some diligent monitoring and adjustment. Let’s take a look at some of the most effective ways you can be helping your water heater stay healthy and maybe even get a few more seasons out of it.
In most cases, the first step should be assessment. If you can narrow down the issue at all, start there. If not, a good place to start is cutting power to your machine. These are high-powered devices that carry a significant danger to work on or test the electrical components unless the power is cut. Before checking any electrical component, turn off the power supply to your heater at your circuit breaker.
Once safe and confirmed that it is turned off, you can test connections and wiring for breaks or faults. If you are not prepared to do this, call a repair service to come assess things.
Your hot water heater will have what is called a Temperature Pressure Release valve. There are a few steps you can take to test this valve. Shut off the power and turn off the cold-water supply to your tank. If this valve is having issues, this repair is simple enough and doesn’t necessarily need the added cost of plumber. Place a bucket under the pipe connected to your TPR valve and then lift the tab to drain some of the water. Drain the tank partially, remove the valve with a pipe wrench and replace with a new piece. This installation is not difficult.
As with all home repair or prevention however, assessing the severity is always important, and always call a San Antonio plumber if you are uncertain.
If you aren’t getting hot water, this could mean a faulty heating mechanism. There are a few steps you can take to diagnose this. If your breaker has tripped, flip it off and on again. If it has not, there is a high-temperature cutoff reset button you can access behind the upper heating element panel. This can be a potential fix, but if it does not work, replacing the heating elements may be the next step. The cost of plumber may be well justified.
Not enough hot water or water being too hot can be a serious problem and in either case it is possible that one or both of your heaters’ thermostats are set wrong. The recommended heat setting for both thermostats is between 115 and 125 Fahrenheit. Both should be at the same temperature. Adjusting both thermostats with a flat head screwdriver to be the same value in the correct range may solve the problem. Do not attempt without the proper safety precautions and electrical safety.
Assessment is half the battle, and troubleshooting can be just as important as early detection. Rust colored water, tank noises, corrosion leaks, and so many other issues may require more immediate professional assistance from a water heater repair near me. When in doubt, call a San Antonio professional today.
An off-hour plumbing problem can be very stressful and worrying to deal with. Plumbing troubles can come suddenly and do not operate on your schedule, and looking for a plumber can be extra stressful in an emergency. The reality is that sooner or later, emergencies do happen, and though the effects are not always mild, plumbing emergencies don’t always have to be devastating. Even if they pop up in the middle of the night.
Luckily there are options in San Antonio for a 24 hour plumber near me. No matter your issue and no matter when, an emergency plumber is ready to help. Whether dealing with sewer issues, water heater failures, or pipe problems, timing is of the essence.
When you call a 24 hour plumber, there are some ways you can help to limit the damage, hold off escalation, or better prepare for their arrival. Some measures may be more specific to certain problems, but here is a quick guide to some of the most practical steps you can take when calling an emergency plumber to your home or business.
With most household or business plumbing issues, the first failsafe action you should take is to turn your water off completely to prevent further water damage, flooding, or pressure. If the water problem is coming from a water fixture such as a faucet or toilet, turn off the connection to its water supply. If you do not have direct access to this or cannot tell where the source is located, turn off the water supply to the entire building or suite at your water meter.
Be prepared by making sure all of the members of the household are aware of water valve locations for emergency shut off.
It is important to determine how urgent the problem is and to learn the scope and progression of the damage. Find out what is being affected and turn off the water. Some small issues may not need an immediate call to a plumber. Emergencies should not be ignored, but lesser issues may not require premium all-hours rates.
Be calm when making your call. Try to slow down and be specific and thorough in your description of the problem. The more detail you can provide the better. Ask to speak to a plumber directly for the best assessment.
For certain plumbing problems, it is better to not get involved. Cutting the water is almost always wise, and in leaking issues trying to mop some or collect the water however possible can be helpful in minimizing damage. This isn’t always the case. Sewage leaks and septic floods can be hazardous to clean up or even be in the presence of.
If you smell a sewage odor you should call a 24 hour plumber near me to assess and deal with the problem. Do not try to fix this and do not delay in assessing the problem as this can be hazardous to your health.
Once you have assessed the problem and talked to an available plumber, they can help you determine if the issue deals with mainline supply, sewer blockage, manhole problems, or other grander infrastructure problems. If one of these problems is the issue, you will need to check with the water company immediately.
Your water heater is the unsung hero of your plumbing system. It provides you with reliable hot water for your showers, dishes, and laundry at all times, day or night. You may never think of it, but when you suddenly are struck with icy cold water in the shower, it will be at the top of your mind.
At that point, you will be searching for “water heater repair near me” in San Antonio very quickly. It’s an important appliance, and one that you can’t simply go without for a few days or more. Here are some signs that you need hot water heater repair.
If your water has started coming out hot but then cooling down as you use it, and then even heating up again, then it might be a sign that there is an issue with your water heater. Your hot water should come out of the tap consistently without fluctuating. In many cases, water heaters lose heat because mineral deposits have built up over time. They can cover over the heating elements of your water heater and prevent it from doing its job properly. A hot water heater repair professional can remove the deposits and replace the damaged or faulty heating elements.
Having discolored water is almost certainly a sign of a problem with your plumbing system, and the water heater is often the culprit. Often the water is rusty-colored, or it might have tiny dark specs. This is not only a sign of problems, but it is also dangerous to the health of the occupants of your home. This could be caused by rust in your water heater, or just that it needs cleaning. Search “water heater repair near me” with a search engine and have a professional from People’s Choice Plumbing come and determine the cause. They will either clean out the water heater or replace the rusting components.
Your water heater is supposed to provide you with hot water at a moment’s notice that lasts as long as you need it. Sometimes the tank runs out, but if your hot water is running out faster than it should, then you might need hot water heater repair. It could be an indication that one of the heating elements in your water heater isn’t working properly.
If your water heater ages and starts to fail, you might start to hear a buzzing noise. Over time, this could become a rumbling noise. It might sound like your water heater is going to explode. It won’t, and in fact those noises are normal. However, if you hear a banging noise, then it could be a sign that there are big problems. It could mean that there is a broken drip tube or a leak somewhere in the heating system.
Rusting and corrosion are signs that your water heater may be at the end of its useful life. You might end up searching for “water heater repair near me,” but in reality, you might need an entirely new water heater. They tend to last up to 12 years, so if your water heater is much older, then you should start looking for a new one.
Never let any issues with your water heater go for too long. You might think things are still running well, but by ignoring a problem you could end up in a suddenly very cold shower.
A lot of San Antonio homeowners might understand that their plumbing plays a big part in their lives, but they don’t really spend much time thinking about how well it works. It’s only when there’s a big problem that they notice the performance of their plumbing system. A better approach is to be aware of potential problems with your plumbing that might develop into needing emergency plumbing repair. That way you can hopefully prevent those issues and avoid having to call a 24 hour plumber.
If you own a home, there’s a good chance you’ve already experienced a clogged drain or two. It’s what is happening when your drains don’t flow as quickly as they usually do, or no water goes down at all. In a lot of cases, you can use a liquid plumbing product or a tool you have around the house to get rid of it. However, when you do this, those home products don’t usually remove the blockage entirely. They get rid of just enough to get the water flowing again, but they will often just clog back up again shortly after. If you’ve got a stubborn clog or one that keeps coming back, it’s always best to contact a professional for help. They will not just remove the entire blockage and clean out the drain, but check to make sure that it isn’t a symptom of something more serious. If it is, then you could wake up one night to a disaster that requires contacting a 24 hour plumber.
Many people see a leaky faucet and think of it as no big deal. It might not affect their plumbing system’s performance, and it seems like a small amount of water, so nothing to worry about, right? Wrong. First of all, a leaky faucet will drive up your water bill. Those drops can add up quickly. Plus, there may be further damage that you can’t detect that is caused by the leak. Calling in someone for an emergency plumbing repair is your best bet to repair the leak and make sure there is no other damage.
If you suddenly notice a noise when you flush your toilet, or turn on a fixture, then that is a very common sign that there’s a problem. Clangs, bangs, and groaning can all be a sign of a blockage. If the weather is unusually cold, it could also mean ice buildup in the pipes. Blockages deep in the plumbing system will almost definitely require a professional to come and take care of it. Never ignore those noises. They almost always are a sign that something is amiss, and you may end up with a plumbing disaster that needs to be addressed by a 24 hour plumber.
The best way to avoid clogging your toilet is to never put anything in your toilet that shouldn’t go in there. Baby wipes and paper towels, for example, should not go into your toilet. Makeup wipes and cotton balls shouldn’t either. If your toilet isn’t flushing properly, it won’t go away on its own. The sooner you get it repaired, the better it will be. If a malfunctioning toilet is left on its own, then you may end up needing emergency plumbing repair after an unpleasant mess backs up onto your bathroom floor.
Your plumbing system usually runs well behind the scenes providing you reliable water. If you suspect something is wrong, don’t delay. Get it fixed as fast as possible.
When your water heater is working properly, it’s easy not to think about it at all. For most homeowners, water heaters are out of sight and out of mind. But when your water heater malfunctions, it can immediately diminish your quality of life. People in your house will stop bathing. Dishes may pile up. You’ll have a harder time getting your clothes clean. The list goes on and on.
If your water heater is still on the newer side, and certainly if it’s under seven years old, it will typically be more cost-effective to repair than to replace it. But for older units, it might make more sense to get rid of them and spring for something new.
The question is, how do you pick the right water heater for your house? Not all units are created equal, and there are a number of salient factors to consider. Here’s a quick guide from People’s Choice Plumbing.
Different Types of Water Heaters
To begin with, it’s helpful to know the different kinds of water heaters that are available. Some general categories include:
What to Consider When Picking a Water Heater
Additionally, make sure you take into account a few of the primary attributes of a new water heater. Examples include:
Find Out Which Water Heater is Right for You
At the end of the day, there are a lot of options to choose from, and many different factors to consider.
So what’s the best way of determining which water heater is right for you?
One step is to contact a plumber who can counsel you, recommending a unit based on the size of your home and your family.
To speak with an expert from People’s Choice Plumbing, reach out today.
Homeowners call plumbers for all sorts of reasons. They call because they run out of hot water. They call because they spring a leak. They call when faucets or fixtures don’t work the way they’re supposed to.
Very few homeowners call plumbers because they’re getting too little water pressure.
In fact, most homeowners love high water pressure, especially when they get into the shower.
So why would anyone ever ask for a pressure reducing valve (PRV) to be installed?
Reasons to Consider a Pressure Regulator
There are actually a number of ways in which homeowners might benefit from PRV installation.
1) A PRV can extend the lifespan of your appliances.
Home appliances aren’t cheap. Generally speaking, you probably want to do anything in your power to prolong their lifespan, and put off replacement. And one way you can do that is through installing a pressure regulator.
Consider your dishwasher. High levels of water pressure can place a lot of strain on your dishwasher and cause it to break down prematurely.
By regulating household water pressure, though, you can minimize that strain, and keep your dishwasher working for a while to come.
2) Pressure regulators can preserve your plumbing fixtures, too.
It’s not just appliances like your dishwasher that become stressed by too much water pressure. Shower heads, faucets, and other fixtures can also undergo strain.
Nobody’s saying you have to settle for a shower head that just trickles out, but there is a happy medium you can reach: Robust water pressure that’s gentle enough on your fixtures.
3) What if your house is connected to a new water supply line?
Imagine that your city hooks you up to a new water supply line, which boosts the pressure coming into your home.
All of a sudden, your pipes, hoses, and appliances may encounter significantly higher psi than anything they’re used to. This can cause them to rupture; indeed, this is the most common cause of household water damage!
The best way to mediate water pressure and avoid this problem is through proactively installing a PRV.
4) A PRV can help you save money.
Last, and perhaps most obviously: By regulating the psi coming into your home, you can potentially decrease your monthly water bills. Even if it’s just by a few dollars, it may really add up over time.
Improved energy efficiency is one of the best reasons to consider having a pressure regulator installed.
Learn More About PRV Installation
Maybe you’ve never put much thought into the pros and cons of a pressure regulator… but the truth is, most homes benefit from having one installed.
Do you have additional questions about PRV installation? Or would you like to discuss having a pressure regulator installed for your home? Either way, we’d love to hear from you here at People’s Choice Plumbing.
We’re pleased to be a trusted provider of PRV installation. To speak with us directly, reach out at your next opportunity.
When you turn on your shower, does the water sputter languidly, in no real hurry to exit the faucet? Or is it like a pent-up fire hose, pinning you to the back wall in a tile-cracking torrent? Do your plumbing pipes rattle and clang or groan and gripe? None of those issues are normal and if this sounds like a day in the life at your home; it’s time to investigate. Left unchecked, you could be in for dire consequences.
Water pressure woes
Some people yearn for fire hydrant-like water pressure in their homes but in this case, is more always better? Excess water pressure has the potential to cause a whole host of costly and long-term damage in the form of leaks, ruptured pipes, and untold gallons of wasted water. Let’s look closer at some of the risks associated with high water pressure:
Water pressure risks
With much of the country on red alert in terms of drought warnings, it is more critical than ever to be aware of and avoid wasting water. If your home’s water pressure is too high it will eventually start to drip from faucets and showerheads and leaky toilet drains. Drips here and there all add up to a great deal of cost and thousands of gallons lost every year. High pressure can also erode pipes and leave you with a very wet basement, or far worse. At the same time, water changing in pressure causes those mysterious and irritating banging noises from the pipes far below in the basement or between the walls.
The high-low dance
Let’s say you live in a charming old farmhouse loaded with elegant accoutrements on the main floors, but in the depths below lurks trouble. Old galvanized plumbing is notorious for building up rust and clogging the lines, causing low water pressure and subsequently low volume. However, if the home’s water pressure is too high, it often results in intermittent blasts of high pressure followed by a dramatic dip in both pressure and volume.
Replacing all of that old galvanized pipe with copper solves water supply issues but in the case of high pressure, you can install a pressure-reducing valve (PRV) and accompanying expansion tank to handle pressure from heating. A key element in keeping your entire plumbing system’s wear and tear at a minimum is controlling excess pressure by monitoring the supply pressure. Readings at the hose gauge should hover around 55 to 60 PSI; higher than (90) creates excess pressure that can rapidly shorten the lifespan (and potentially cause failure) of your home’s critical plumbing fixtures such as:
Toilet tank fill valve
Dishwasher and washing machine valves
Flexible water supply connections
Faucets throughout the house
Emergency shutoff valves
Every one of these are expensive to repair and in all cases the risk of severe water damage from a ruptured line is serious business. Remember that fixing a leak is easy compared to an extensive cleanup project.
High pressure symptoms
You can head off water damage at the pass by staying aware of common precursors to liquid disaster like these:
If a faucet anywhere in the house is off but still dripping water, check the water pressure immediately. Typical home water gaskets and cartridges are not designed to handle high pressure and can fail suddenly.
Eternally running toilet
We’ve all heard the sound of a continually burbling toilet long after flushing. If this happens in your house, remove the tank lid, flush the toilet, and monitor the filling of water inside the tank. You should hear a gentle but steady flow. It’s loud or filling too fast, your pressure might be too high.
What to do with high water pressure
The good news with water pressure issues is that there is almost always opportunity to resolve them. If you notice leaky pipes or hear odd noises from them, investigate to confirm the presence of high pressure. If you have it, you will likely need to replace select pipes and/or repair leaks. While you’re at it, this will be a good time to install a valve to regulate water pressure and reduce potential future damage.
Keep in mind that some plumbing fixes are DIY-friendly but if you suspect a complex problem, call in the help of a pro.
Among the myriad responsibilities of home ownership, some involve run-of-the-mill maintenance like vacuuming and mowing the lawn and changing the furnace filters. Sometimes, however, bigger problems arise and that’s when patience, determination, and some DIY mojo come in handy. One of these times is when you have a backed up sewer, something none of us want to experience.
A back-up sewer can easily result in serious damage to your home’s walls, floors, electrical systems, and furniture, just to name a few. Let’s take a look at traditional responsibilities in maintaining a sewer system and preventative steps to avoid a homegrown disaster.
Many homeowners don’t know that they are responsible for upkeep and any repairs of not only their home’s sewer system but that of the lateral—the pipe running between the main city sewer line and the house. The lateral (and its repairs) falls under the ownership of the homeowner, including all parts of the lateral that reach into the street. If the lateral at your property develops a crack or roots from your big maple tree perforate the pipe; repairs are up to you.
But tree roots are not the only culprit inspiring sewer calamities. Interestingly, the number of backed up sewers in the U.S. is rapidly increasing. Here are some of the most common causes:
Did you know that America is laced with more than a half-million miles of sewer lines? That’s a lot and the average age of all that piping is over 30. In the frenetic pace of growth and headlong sprawl in our cities and suburbs, increasing numbers of homes are being connected to aging sewer systems which leads to backups, overflows, and flooded basements.
As mentioned above, encroaching tree roots searching for water will find the tiniest crack in sewer pipes and joints, prying them apart as the roots grow. Little cracks become big ones and then come severe water damage and blockages.
Sometimes blockages happen at a city’s main sanitary line and if not recognized soon enough, backed up sewage can gradually work its way up through the floors of nearby homes and businesses. Look for seepage at floor drains or water flowing into your basement.
A backed up sewer is a bad thing; it can lead to tremendous structural damage, electrical failures, and disease. The best strategy is prompt attention to cleanup to mitigate further damage and mess:
Included in your homeowner duties are steps to take to help prevent backups in your home’s sewer lateral as well as the city’s main. Here are some of the most common and effective defenses:
Nearly all of the paper towels, diapers, feminine products, hand wipes, and other related products we use today take decades to deteriorate and are very adept at creating all manner of disarray in sewer lines. Don’t flush these products down the toilet.
Cleaning that frying pan by washing the grease down the drain is a bad idea. As the grease cools it solidifies right there in the sink’s drain, sewer line, or city lines and eventually become a damaging clog.
If your sewer lines are old and brittle, replacing with plastic pipe will keep tree roots at bay and rigid plastic lines almost never crack.
If tree roots continue to present a challenge by infiltrating your sewer lateral, consider cutting the roots yourself or call in a pro.
A backwater prevention valve is a highly effective fixture that is installed into a sewer line in a home’s basement. The valve lets unwanted seepage to exit but not return and clog up the works. Enlist the help of a professional plumber to ensure this complex procedure is done right.
Never install sump pumps, French drains, and similar flow management fixtures to your sewer system. Not only is it illegal, silt and assorted debris will quickly cause a blockage.
Many San Antonio pet owners underestimate how much their pets shed. All cats and dogs shed hair on a daily basis. Small amounts of hair may not be noticeable after washing your pet, but tiny hairs can clog the pipes in your home. Hundreds of hairs can come off in the bathtub and other areas of your home that have open drains. Fortunately, there are three things you can do to prevent clogged pipes.
A plumber can suggest a hair trap that is suitable for pets. When you are drying a wet dog, you might overlook some of their hair in the tub. Your pipes will clog when too many hairs are washed down the drain. A hair trap is specifically designed to catch loose hairs, and using it on a regular basis will eliminate clogged pipes.
Dogs love playing near exposed pipes, and their fur can shed near exposed drains. Exposed pipes are a plumbing hazard to large and small pets. Small animals can fall into an open drain, and large animals can chew on pipes. This is usually a problem in homes that have a garage. Covering exposed drains will keep your pets safe from danger, and it will prevent stray hairs from slipping into your plumbing system.
Plumbing issues are frustrating, but professionals are accustomed to dealing with plumbing issues. A plumber can survey your plumbing system and dislodge any fur balls. When drain cleaner will not remove a clog, you may need a plumber to unclog your pipes. When your pipes are cleaned, a plumber can give you personalized advice on keeping your pipes clean.
A small plumbing problem can quickly become a large problem in your San Antonio home. If water is taking longer to go down the sink or tub, you may have a clog in your pipes. Drain cleaner can temporarily fix the problem, but a clogged pipe can eventually cause a sewage leakage. Drain traps will keep hair out of your drains, but you may need to hire a plumber if your plumbing system is malfunctioning.
Don’t let your fluffy pup clog up your drain! If you need drain cleaning in your San Antonio, TX home call People’s Choice Plumbing LLC at 210-789-6014 today!
A leak in the home can be absolutely devastating if left for a long period of time, as dripping or leaking water can slowly erode all sorts of areas of your San Antonio home, which usually happens behind walls and out of sight.
This can cause a huge financial crisis if you happen to have a leak in your home for too long, so it is very important that you check to make sure you do not have any leaks and if you do come to find that you have a leak, to get it fixed as soon as you possibly can to avoid further damage. Here are some effective ways that you can detect a water leak.
Your water meter should remain stagnant if every faucet in the home is shut off, meaning you will be able to tell if there is a leak in the home by shutting off each and every valve and monitoring the meter. If the gauge stays in the same place, it is a great indication that there is no leak in the home and that you are alright. However, if the water meter increases, when you know for a fact that every single faucet in the home has been shut off, you will know beyond the shadow of a doubt that you have a leak somewhere in your piping system.
Often times when there is a leak in the home, you will be able to hear it at some point in the home. You can do a simple check by turning everything that may make noise in the home, walking around slowly and listening for any trickling sounds that may be coming from the walls, ceiling, or floor.
Although there are definitely methods that will give you a pretty good idea as to whether you have a leak or not, there is no debate about the fact that it is far better to call a professional San Antonio plumbing company to do an inspection on your home and let you know if you do in fact have a leak or not. The biggest benefit of going this route is the fact that if the company that you hire does find a leak, they will be able to fix the problem for you as well.
Call People’s Choice Plumbing LLC at 210-789-6014 today to get your San Antonio, TX system checked out by a professional plumber!